|
| |
TM 9-2320-364-34-2
8-22
8-3. TRANSFER CASE ASSEMBLY SUPPORT REPLACEMENT (CONT).
(l)
Position two washers (10) and
screws (13) in support bracket (6) and
right frame bracket (24).
(m) With the aid of an assistant, install two
lower mounts (12), plate (11), two
washers (10) and locknuts (9) on screws
(13).
(n)
Reposition hose 2831 (7) and install
two cushion clips (5) on support
bracket (6) with two screws (4),
washers (3), lockwashers (2) and nuts
(1).
(o)
Remove transmission jack from under
transfer case (8).
c.
Follow-On Maintenance:
Install auxiliary fuel tank (if equipped),
(TM 9-2320-364-20).
Start engine, (TM 9-2320-364-10).
Build air pressure to 125 psi (861 kPa).
LHS in transit position, (TM 9-2320-364-10).
Shut OFF engine, (TM 9-2320-364-10).
Check for leaks, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
