|
| |
TM 9-2320-364-34-2
8-26
8-4. TRANSFER CASE YOKE AND OIL SEAL REPLACEMENT (CONT).
(7)
Position retainer washer (2), washer (4) and
screw (1) on rear yoke end (3).
(8)
With aid of an assistant and using flange
holder, tighten screw (1) on yoke end (3) to
375 lb-ft (509 N.m).
c.
Follow-On Maintenance:
Fill transfer case, (TM 9-2320-364-20).
Install driveshaft, (TM 9-2320-364-20).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
