| |
TM 9-2320-364-34-2
9-33
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
NOTE
Perform Steps (1) and (2) if
studs were removed.
(1)
Coat threads of eight studs (3) with sealing
compound.
(2)
Install eight studs (3) in ring gear carrier
assembly (8). Tighten studs to 65 lb-ft
(88 N.m).
(3)
Install muff (12) and sun gear (10) in ring
gear carrier assembly (8).
(4)
Position jet extractor between teeth of sun
gear (10) and teeth of ring gear carrier
assembly (8).
(5)
Coat threads of screw (11) with sealing
compound.
(6)
Install screw (11) in sun gear (10) and
hub (4). Tighten screw to 135 to 165 lb-ft
(183 to 224 N.m).
(7)
Install end cap (9) on sun gear (10).
|