|
| |
TM 9-2320-364-34-2
9-34
9-6. AXLE PLANETARY HUB GEARS REPLACEMENT (CONT).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(8)
Coat mating surface of ring gear carrier
assembly (8) with adhesive.
(9)
Position planetary gear carrier assembly (7)
in ring gear carrier assembly (8).
(10)
Coat protruding threads of eight studs (3)
with sealing compound.
(11)
Install eight washers (2) and locknuts (1)
on studs (3). Tighten locknuts to 31 lb-ft
(42 N.m).
(12)
Install screw (6) in planetary gear carrier
assembly (7) and tighten until screw bottoms
out. Back screw off 3/4 of a turn.
(13)
Coat protruding threads of screw (6) with
adhesive.
(14)
Install nut (5) on screw (6). Tighten nut
to 87 lb-ft (118 N.m).
c.
Follow-On Maintenance:
Fill wheel ends, (TM 9-2320-364-20).
Install wheels/tires, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
