|
| |
TM 9-2320-364-34-2
9-41
(13)
Repeat Steps (6) through (12) for
remaining shaft.
(14)
Repeat Steps (2) through (12) for
remaining axle.
b.
Installation.
Use care when removing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released and
could cause injury to personnel.
NOTE
Ensure protruding side of cross
faces shaft.
(1)
Position cross (14) into shaft (11).
(2)
Install two caps (15) on cross (14) and
shaft (11).
(3)
Install two retaining rings (10) on shaft (11).
(4)
Install two caps (13) on cross (14) and
block (9).
(5)
Install two retaining rings (10) on block (9).
(6)
Install two screws (12) in caps (13).
(7)
Install two grease fittings (8) on block (9).
|
