|
| |
TM 9-2320-364-34-2
9-56
9-10. AXLE NO. 1, 2 AND 5 INNER AND OUTER AXLE SHAFT SEAL AND
BEARING REPLACEMENT (CONT).
b.
Installation.
(1)
Apply light coat of grease to bearing (20).
(2)
Install bearing (20) in axle housing (14).
Use care when installing retaining
rings. Retaining rings are under
tension and can act as projectiles
when released and could cause
severe eye injury.
(3)
Install retaining ring (19) in axle housing
(14).
(4)
Apply light coat of grease to seal (18).
(5)
Install seal (18) in axle housing (14).
(6)
Install constant velocity shaft (15) in axle
housing (14).
(7)
Apply light coat of grease to bearing (17)
and seal (16).
(8)
Install bearing (17) in wheel end (4).
(9)
Install seal (16) in wheel end (4).
20
19
18
15
14
16
4
17
|
