|
| |
TM 9-2320-364-34-2
9-63
a.
Removal.
(1)
Loosen locknut (1) until locknut is flush with threaded end of torque rod (2).
Torque rod is under extreme
pressure when being pressed
from axle. Torque rod can be
dangerous when it breaks loose
and could cause injury to
personnel.
NOTE
Strike torque rod mount with
soft faced hammer while
pressure is being applied to
torque rod.
(2)
Using hand jack kit, press tapered end of
torque rod (2) from Axle No. 3 (3), until
torque rod (2) is loosened.
|
