| |
TM 9-2320-364-34-2
9-64
9-11. AXLE NO. 3 ASSEMBLY REPLACEMENT (CONT).
Trailing beam assembly weighs 150 lbs (68 kg). Attach a hydraulic jack to axle end of trailing
beam assembly prior to removal to prevent possible injury to personnel.
NOTE
Both trailing beams are removed the same way. Left side of Axle No. 3 is shown.
(3)
Support Axle No. 3 (3) end of trailing beam assembly (4) with a jack.
(4)
Remove locknut (5), two washers (6) and screw (7) from trailing beam assembly (4). Discard locknut.
(5)
Remove two adapters (8) from trailing beam assembly (4).
(6)
Using hydraulic jack, lower Axle No. 3 (3) end of trailing beam assembly (4).
(7)
Remove spacer (9) from trailing beam assembly (4).
|