|
| |
TM 9-2320-364-34-2
9-65
(8)
Remove two locknuts (10) and washers (11)
from stud of each fuel tank strap (12).
Discard locknuts.
(9)
Separate two fuel tank straps (12) from fuel
tank bracket (13).
Main fuel tank weighs 50 to 700
lbs (23 to 318 kg) depending on
the quantity of fuel inside.
Support main fuel tank with
suitable lifting device prior to
removing mounting hardware to
prevent possible injury to
personnel.
(10)
Using lifting device, lift right side of main
fuel tank (14) upward approximately 3 in.
(76 mm).
(11)
Position block of wood on right fuel tank
bracket (13). Lower right side of main
fuel tank (14) onto wood block.
The trailing beam assembly
weighs 150 lbs (68 kg). Attach a
suitable lifting device to truck
end of trailing beam assembly
prior to removal or installation to
prevent possible injury to
personnel.
(12)
Support truck end of trailing beam
assembly (4) with hydraulic jack.
(13)
With the aid of an assistant, remove
screw (15) and locknut (16) from trailing
beam assembly (4). Discard bolt and
locknut.
(14)
Using lifting device, remove truck end of
trailing beam assembly (4) from trailing
beam assembly mount (17) and lower to
ground.
(15)
Remove plastic bushing (18) from each
trailing beam assembly (4). Discard plastic
bushing.
|
