|
| |
TM 9-2320-364-34-2
9-102
9-13. AXLE NO. 5 ASSEMBLY REPLACEMENT (CONT).
NOTE
Perform Steps (20) through (23)
if truck is equipped with self-
recovery switch.
(20)
Position roller (34) on self-recovery winch
bracket (31).
(21)
Coat pin (33) with grease.
(22)
Position pin (33) up through pin removal
hole in self-recovery winch bracket (31).
(23)
Position locking plate (32) into slot of
pin (33) and install two screws (30) and
locknuts (29) on self-recovery winch
bracket (31). Tighten locknuts to 130 lb-ft
(18 N.m).
(24)
Install air line 2338 (27) to fitting (28).
|
