|
| |
TM 9-2320-364-34-3
14-11
(22)
Using a lifting device, raise truck enough to
allow removal of stabilizer jacks from
beneath frame rails (1).
(23)
Lower frame rails (1) and remove lifting
device.
(24)
Tighten four screws (27) on nuts (23) to 275
to 300 lb-ft (373 to 407 N.m) in the sequence
shown. Repeat tightening procedure a
minimum of two times.
c.
Follow-On Maintenance:
Connect Axle No. 5 lateral torque rod, (Para 14-8).
Connect Axle No. 4 shock absorbers, (TM 9-2320-364-20).
Install wheel/tires, (TM 9-2320-364-10).
Lubricate spring assembly, (TM 9-2320-364-20).
Adjust load sensing valve (rear spring assembly only), (TM 9-2320-364-20).
Align/adjust steering system, (Para 12-8).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
