|
| |
TM 9-2320-364-34-3
14-13
(3)
Remove two nuts (5) and lockwashers (6)
from studs (7). Discard lockwashers and
nuts.
(4)
Remove two screws (8) and lockwashers (9)
from trailing beam (10). Discard
lockwashers and screws.
(5)
Compress air bag (11) and remove from
bracket (12) and trailing beam (10).
b.
Installation.
NOTE
Right and left air bags on this
axle are installed in the same
way. The left side air bag is
shown.
(1)
Stretch air bag (11) into position against
bracket (12).
(2)
Install two lockwashers (6) and nuts (5) on
studs (7). Tighten nuts to 25 lb-ft (34 N.m).
(3)
Stretch air bag (11) into position against
trailing beam (10).
(4)
Install air bag (11) on trailing beam (10)
using two lockwashers (9) and screws (8).
Tighten screws to 55 lb-ft (75 N.m).
|
