|
| |
TM 9-2320-364-34-3
14-41
NOTE
Tag and note number and
size of spacers for
installation.
(d)
With the aid of an assistant, remove
two locknuts (5), screws (6), torque
(2), bracket (7) and spacers (8) from
frame (9). Discard locknuts.
(2)
Installation.
(a)
Apply lubricating oil to threads of
shaft on torque rod (2).
(b)
Position tapered shaft of torque rod
in torque rod mount of axle (3).
(c)
Position washer (4) and locknut (1) on
torque rod (2). Tighten locknut until
outer face of nut is even with threaded
end of torque rod (2).
NOTE
Install same number and
size spacers removed
during removal.
(d)
With the aid of an assistant, install
spacers (8), bracket (7), truck end of
torque rod (2), two screws (6) and
locknuts (5) on frame (9).
(e)
Tighten locknut (1) to 175 to 225 lb-ft
(237 to 305 N.m).
(f)
With the aid of an assistant, retighten
locknut (1) to 175 to 225 lb-ft (237 to
305 N.m) while striking torque rod
mount of axle (3) with hammer.
|
