|
| |
TM 9-2320-364-34-3
15-13
Cab weighs 1,700 lbs (772 kg). Attach a suitable lifting device prior to removal to prevent
possible injury to personnel.
(50)
With the aid of an assistant, attach lifting device and straps to cab (27). Position wooden blocks against
cab above door frame and below roof line to protect cab.
(51)
Raise lifting device to take slack out of straps.
(52)
With the aid of an assistant, remove two locknuts (135), washers (136) and screws (137) from front mount
bracket (138). Discard locknuts.
(53)
Using cable ties, strap doors (139) to grab handles (140) and attach guide rope to left and right grab
handles (140).
NOTE
Step (54) applies to left side of truck only.
(54)
Remove locknut (141), ground strap (142) and screw (143) from bracket (144). Discard locknut.
(55)
Remove locknut (145), washer (146) and screw (147) from each side of rear mount (148). Discard locknut.
All personnel must stay clear of cab when lifting is in progress. Failure to comply may result in
injury or death to personnel.
(56)
With the aid of an assistant and using lifting device, raise cab (27) up slightly. If cab tilts forward or
backward, lower cab back down.
(57)
Adjust straps to level cab (27).
|
