|
| |
TM 9-2320-364-34-3
15-14
15-2. CAB ASSEMBLY REPLACEMENT (CONT).
Ensure air lines and electrical
wires do not tangle with the cab.
(58)
With the aid of an assistant and using lifting
device, slowly raise cab (27).
(59)
With the aid of an assistant using lifting
device and guide rope, remove cab (27)
from truck and position on four jackstands.
NOTE
Perform Steps (60) and (61) only if mounts are damaged.
(60)
Remove two washers (149) and mounts (150) from rear mounts (148).
(61)
Remove two mounts (151) from mounting bracket (138).
|
