|
| |
TM 9-2320-364-34-3
15-27
Materials/Parts
Adhesive (Item 3, Appendix B)
Cloth, Cleaning (Item 11, Appendix B)
Primer (Item 45, Appendix B)
Sealer, Automotive (Item 51, Appendix B)
Solution, Soap (Item 67, Appendix B)
Windshield Seal/Locking Strip
(Item 706, Appendix E)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Engine shut OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Light bar removed, (TM 9-2320-364-20)
Wiper arm assembly removed (as required),
(TM 9-2320-364-20)
Vehicle weight classification data plate removed
(right side only), (TM 9-2320-364-20)
Gun mount removed (right side only -
if equipped), (TM 9-2320-364-20)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
15-3. WINDSHIELD GLASS REPLACEMENT.
a.
Removal.
Always wear eye protection and
protective clothing when
handling glass. Failure to comply
may result in injury to personnel.
NOTE
Left and right windshields are
replaced the same way.
(1)
Coat windshield seal/locking strip (1) with
soap solution.
(2)
Disengage windshield seal/locking strip (1).
(3)
With the aid of an assistant, push
windshield (2) from inside the cab (3) to
remove from windshield seal/locking
strip (1).
NOTE
Perform Step (4) if windshield
seal/locking strip is damaged.
(4)
Remove windshield seal/locking strip (1)
from cab (3).
|
