|
| |
TM 9-2320-364-34-3
16-15
Do not stick fingers under
section to remove wear pads, or
injury to hands may result.
NOTE
Tag wear pads as to side and
extension. Note location,
quantity and size of any shims.
(10)
Lift up on inner-mid section (20) and
remove wear pads (24) from front of base
section (4).
NOTE
Perform Step (11) if wear pad has
shim and screw.
(11)
Remove screw (25) and shim (26) from
wear pad (24). Discard wear pads.
NOTE
Move inner-mid section slowly to
just past base section.
(12)
Remove inner-mid section (20) from base
section (4). Reposition lifting device as
required to balance inner-mid section.
(13)
Remove cable (8) from base section (4).
NOTE
Tag wear pads as to side and
extension. Note location,
quantity and size of any shims.
(14)
Remove two screws (27) and upper wear
pads (28) from upper rear section of inner-
mid section (20).
NOTE
There may be a washer behind
wear pad. Tag and mark after
removal.
(15)
Remove side wear pads (29) and washer
from inner-mid section (20). Discard wear
pads.
|
