| |
TM 9-2320-364-34-3
16-16
16-3. BOOM ASSEMBLY REPAIR (CONT).
(16)
Remove screw (30) and lockwasher (31)
from inner-mid section (20). Discard
lockwasher.
(17)
Remove jam nut (32) and swivel nut (33)
from cable (34), at rear of inner-mid
section (20).
(18)
Remove screw (35), lockwasher (36) and
washer (37) from cable guide (38).
Discard lockwasher.
(19)
Remove pin (39) from
inner-midsection (20).
(20)
Pull outer-mid section (40) out from inner-
mid section (20) approximately one ft (31 cm).
NOTE
Note location and quantity of
shims.
(21)
Remove two screws (41), washers (42),
shim (43) and wear pad (44) from inner-
mid section (20). Discard wear pad.
|