|
| |
TM 9-2320-364-34-3
16-28
16-3. BOOM ASSEMBLY REPAIR (CONT).
NOTE
Perform Steps (77) through
(90) if boom base section is
damaged.
Position drain pan under
tubes and hoses.
Tag and mark hoses and
tubes prior to removal.
Cap hoses and tubes after
removal.
(75)
Remove four screws (153) and two
clamps (154) from boom base section (4).
(76)
Disconnect tube (155) from tube (156).
(77)
Remove two screws (157) and clamp (158)
from boom base section (4).
(78)
Disconnect tube (156) from boom base
section (4).
(79)
Remove four screws (159) and two
clamps (160) from boom base section (4).
(80)
Disconnect tube (161) from tube (162).
|
