|
| |
TM 9-2320-364-34-3
16-36
16-3. BOOM ASSEMBLY REPAIR (CONT).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound gets
on skin or clothing, wash
immediately with soap and
water.
(40)
Apply sealing compound to threads of two
screws (115).
(41)
Install pin support plate (113) on pin (110)
with two screws (115). Tighten screw to 28
lb-ft (38 N.m).
(42)
Apply sealing compound to threads of
screw (111).
(43)
Install roller (114) and pin support
plate (115) on structural section (91) with
washer (112) and screw (111). Tighten
screw to 20 lb-ft (27 N.m).
NOTE
Ensure grease fitting is facing
straight out.
(44)
Install grease fitting (109) in pin (110).
|
