|
| |
TM 9-2320-364-34-3
16-63
The crane hydraulic system
operates at oil pressures up to
3,100 psi (21,375 kPa). Never
disconnect any hydraulic line or
fitting without first dropping the
pressure to zero. Failure to
comply may result in serious
injury or death to personnel.
(8)
Apply hydraulic oil to two preformed
packings (4).
(9)
Install two preformed packings (4) on
elbows (5).
(10)
Connect two hoses (3) on elbows (5).
c.
Follow-On Maintenance:
Load test crane, (Para 16-32).
Stow crane, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
