|
| |
TM 9-2320-364-34-3
16-76
16-9. MAST ASSEMBLY REPLACEMENT (CONT).
(6)
Drive out pin (10) far enough to free
mast (1) from turntable (11).
(7)
With the aid of an assistant, guide mast (1)
from turntable (11).
(8)
Lower mast (1) and remove lifting device.
b.
Installation.
Mast weighs 109 lbs (49 kg).
Attach suitable lifting device
prior to installation to prevent
possible injury to personnel.
(1)
Attach lifting device to mast (1).
(2)
With the aid of an assistant, align mast (1)
with turntable (11).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(3)
Apply antiseize compound to pin (10).
(4)
Install mast (1) with pin (10). Drive pin (10)
through mast (1) until flush with sleeve (12).
Keep mast in upright position.
|
