|
| |
TM 9-2320-364-34-3
16-107
Materials/Parts
Cloth, Cleaning (Item 11, Appendix B)
Sealing Compound (Item 56, Appendix B)
Solvent, Drycleaning (Item 68, Appendix B)
This task covers:
a. Disassembly
b. Cleaning/Inspection
c. Assembly
INITIAL SETUP
Equipment Condition
Hoist assembly on clean work surface
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Gloves, Chemical Oil Protective
(Item 81, Appendix F)
Goggles, Industrial (Item 83, Appendix F)
Socket , Socket Head Screw 5/16 in. 1/2 in.
Drive (Item 210, Appendix F)
Wrench Set, Socket 3/8 in. Drive
(Item 273, Appendix F)
Wrench, Torque (0-60 N.m)
(Item 276, Appendix F)
16-15. HOIST CABLE FOLLOWER REPAIR.
Tools and Special Tools - Continued
Wrench, Torque (0-175 lb-ft [0-237 N.m])
(Item 277, Appendix F)
a.
Disassembly.
When second spring is released, cable follower may fly up against bracket. Keep hands and
face away from this area, or injury to personnel may result.
NOTE
Remove spring on side with extra block first.
(1)
Hold cable follower (1) up while prying ends of two springs (2) down to remove spring pressure on cable
follower.
(2)
Remove two screws (3), four thrust washers (4) and cable follower (1) from bracket (5) and separate two
springs (2).
|
