|
| |
TM 9-2320-364-34-3
16-123
(9)
With the aid of an assistant, guide swing
drive gear reducer (3) from subframe
assembly (14).
(10)
Remove two screws, washers and chain
from swing drive assembly gear reducer
(3).
CARC paint contains
isocyanate (HDI) which is
highly irritating to skin and
respiratory system. High
concentrations of HDI can
produce symptoms of
itching and reddening of
skin, a burning sensation in
throat and nose and
watering of the eyes. In
extreme concentrations,
HDI can cause cough,
shortness of breath, pain
during respiration, increased
sputum production and chest
tightness. The following
precautions must be taken
whenever using CARC
paint:
NEVER weld or cut
CARC-coated materials.
NOTE
Perform Steps (11) through (14)
if a new gear reducer is to be
installed.
(11)
Using a wire scratch brush, remove CARC
paint from area four in. (102 mm) around
welding/grinding points of spacer ring (15).
(12)
Grind off weld from spacer ring (15) and
subframe assembly (14) and remove spacer
ring (15).
(13)
Using a wire scratch brush, remove CARC
paint from area four in. (102 mm) around
welding/grinding points of wedge (16).
(14)
Grind off weld from two wedges (16) and
spacer ring (15) and remove two wedges (16).
16
15
|
