|
| |
TM 9-2320-364-34-3
16-134
16-19. SWING DRIVE MOTOR VALVE REPAIR (CONT).
(3)
Apply hydraulic oil to preformed
packings (14) and (11).
(4)
Install two preformed packings (14), valve
seats (13), springs (12), preformed
packings (11) and check valves (10) in
manifold (2).
NOTE
Position elbow as noted prior to
removal.
(5)
Apply hydraulic oil to preformed
packing (9).
(6)
Install preformed packing (9) and elbow (8)
in valve (2).
(7)
Apply hydraulic oil to two preformed
packings (7).
(8)
Install two preformed packings (7) and
fittings (6) in valve (2).
(9)
Apply hydraulic oil to preformed
packings (5) and (3) and back up rings (4).
(10)
Install two preformed packings (5), backup
rings (4) and preformed packings (3) on
two relief valves (1).
(11)
Install two relief valves (1) in valve (2).
|
