|
| |
TM 9-2320-364-34-3
16-135
e.
Installation.
(1)
Apply hydraulic oil to two preformed
packings (10).
(2)
Install two preformed packings (10) in
motor (9).
(3)
Install swing motor valve (4) on motor (9)
with four lockwashers (8) and screws (7).
Tighten screws to 108 lb-in (12 N.m).
(4)
Apply hydraulic oil to two preformed
packings (6).
(5)
Install two preformed packings (6) and
tube (3) on brake (5) and valve (4).
(6)
Apply hydraulic oil to two preformed
packings (2).
(7)
Install two preformed packings (2) and
hoses (1) on swing motor valve (4).
f.
Follow-On Maintenance:
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
