|
| |
TM 9-2320-364-34-3
16-155
(7)
Remove two valve caps (19), preformed
packings (20), plungers (21), seat (22),
preformed packing (23), springs (24) and (25),
poppets (26) and check balls (27) from
solenoid housing (1). Discard preformed
packings and springs.
(8)
Remove plug (28), preformed packing (29),
spacers (30) and (31), spring (32), check
ball (33), seat (34) and preformed
packing (35) from solenoid housing (1).
Discard preformed packings and spring.
(9)
Remove two caps (36), preformed
packings (37), pistons (38), plungers (39)
preformed packing (40), seat (41) and
springs (42) from solenoid housing (1).
Discard preformed packings and springs.
(10)
Remove two backup rings (43) and
preformed packings (44) from pistons (38).
Discard preformed packings and backup
rings.
(11)
Remove two preformed packings (45) and
backup rings (46) from plungers (39).
Discard preformed packings and backup
rings.
NOTE
Perform Steps (12) through (15)
if plugs are leaking or damaged.
(12)
Remove five plugs (47), preformed
packings (48) and orifice (49) from
solenoid housing (1). Discard preformed
packings.
|
