|
| |
TM 9-2320-364-34-3
16-157
d.
Assembly.
NOTE
Perform Steps (1) through (8) if
plugs were removed.
(1)
Apply hydraulic oil to preformed
packing (55).
(2)
Install preformed packing (55) and plug (54)
in solenoid housing (1).
(3)
Apply hydraulic oil to preformed
packings (53).
(4)
Install two preformed packings (53) and
plugs (52) in solenoid housing (1). Tighten
plugs to 50 to 60 lb-in (6 to 7 N.m).
(5)
Apply hydraulic oil to five preformed
packings (51).
(6)
Install five preformed packings (51) and
plugs (50) in solenoid housing (1). Tighten
plugs to 50 to 60 lb-in (6 to 7 N.m).
(7)
Apply hydraulic oil to preformed
packings (48).
(8)
Install five preformed packings (48) and
plugs (47) in solenoid housing (1). Tighten
plugs to 35 to 40 lb-ft (47 to 54 N.m).
(9)
Apply hydraulic oil to two preformed
packings (45).
(10)
Install two preformed packings (45) and
backup rings (46) on plungers (39).
(11)
Apply hydraulic oil to two preformed
packings (44).
(12)
Install two preformed packings (44) and
backup rings (43) on pistons (38).
(13)
Install two springs (42), seat (40),
preformed packing (41) and plungers (39)
in solenoid housing (1).
(14)
Apply hydraulic oil to two preformed
packings (37).
(15)
Install two pistons (38) preformed
packings (37) and caps (36) in solenoid
housing (1). Tighten caps to 70 to 75 lb-ft
(95 to 102 N.m).
|
