|
| |
TM 9-2320-364-34-3
16-206
16-28. TWO FUNCTION CONTROL VALVE BANK REPAIR (CONT).
(13)
Apply hydraulic oil to preformed
packings (25), (22), (19) and (16).
(14)
Install preformed packing (25) and hose (24)
on elbow (26).
(15)
Install preformed packing (22) and hose (21)
on elbow (23).
(16)
Install preformed packing (19) and hose (18)
on elbow (20).
(17)
Install four preformed packings (16), two
hoses (15) and hoses (14) on four fittings
(17).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a
well-ventilated area.
(18)
Apply sealing compound on threads of four
screws (12).
(19)
Install cover (10) on brackets (6) and (13)
with four screws (12), washers (11),
washers (9), lockwashers (8) and nuts (7).
Tighten nuts to 72 lb-in (8 N.m).
(20)
Install connector (5) in bracket (6) with
nut (3) and lockwasher (4).
(21)
Install cap (2) on bracket (6).
f.
Follow-On Maintenance:
Check oil level, (TM 9-2320-364-10).
Operate crane and check for oil leaks,
(TM 9-2320-364-10).
Load test crane, (Para 16-32).
Stow crane, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
