|
| |
TM 9-2320-364-34-3
16-217
b.
Installation.
Outrigger cylinder weighs 115
lbs (52 kg). Attach suitable
lifting device prior to removal or
installation to prevent possible
injury to personnel.
NOTE
Left and right cylinders are
installed the same way. Left side
shown.
(1)
Install pin (8) and two cotter pins (7) in
cylinder (5).
(2)
Install lifting device on pin (8).
NOTE
During installation, make sure
outrigger cylinder is positioned
so hose connections will align
correctly in subframe barrel.
(3)
Place jack under subframe barrel (6).
(4)
Coat outside of cylinder (5) with anti-seize
compound.
(5)
Install cylinder (5) in subframe barrel (6).
Lower cylinder to rest on jack.
(6)
Remove lifting device from pin (8).
(7)
Remove and discard pin (8) and two cotter
pins (7).
(8)
Lower jack until hole in cylinder (5) aligns
in subframe barrel (6).
(9)
Install pin (8) and two cotter pins (7).
|
