|
| |
TM 9-2320-364-34-3
16-218
16-31. OUTRIGGER CYLINDER REPLACEMENT (CONT).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
NOTE
Install elbows as noted prior to
removal.
(10)
Apply sealing compound on threads of two
elbows (3).
(11)
Apply hydraulic oil to preformed
packings (4).
(12)
Install preformed packings (4) and
elbows (3) in cylinder (5) through holes in
subframe barrel (6).
(13)
Apply hydraulic oil to preformed
packings (2).
(14)
Install two preformed packings (2) and
connect hoses (1).
(15)
Remove lifting device and jack.
(16)
Repeat Steps (1) through (15) for
other cylinder.
c.
Follow-On Maintenance:
Check oil level, (TM 9-2320-364-20).
Install outrigger proximity switch, (TM 9-2320-364-20).
Operate crane and check for oil leaks, (TM 9-2320-364-10).
Load test crane, (Para 16-32).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
