|
| |
TM 9-2320-364-34-3
16-264
16-40. LOAD HANDLING SYSTEM (LHS) MIDDLE FRAME REPAIR (CONT).
Main cylinders weigh 325 lbs
(148 kg). Attach suitable lifting
device prior to installation to
prevent possible injury to
personnel.
(9)
Attach lifting device to left main
cylinder (1).
(10)
Using lifting device, lift main cylinder
into installation position.
Use care when installing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released causing
injury to personnel.
(11)
Install pivot pin (4), shim (3) and retaining
ring (2) on middle frame (5) and main
cylinder (1).
(12)
Remove lifting device from main
cylinder (1).
(13)
Repeat Steps (8) through (11) for right
main cylinder (1).
f.
Follow-On Maintenance:
Install LHS junction box, (TM 9-2320-364-20).
Install middle frame tubes, (Para 16-41).
Install proximity switch (hook arm up), (TM 9-2320-364-20).
Install proximity switch (main frame down), (TM 9-2320-364-20).
Install hook arm, (Para 16-39).
Connect batteries, (TM 9-2320-364-20).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
