|
| |
TM 9-2320-364-34-3
16-276
16-42. COMPRESSION FRAME REPAIR (CONT).
NOTE
Tag and mark all hoses prior
to removal.
Left side and right side
procedures are the same.
Left side is shown.
Cap and plug all hoses and
tubes after removal.
Disconnect hoses 2588, 2888
and 2889 on the right side.
(2)
Disconnect hoses 2887 (7), 2666 (8) and
2890 (9) from three adapters (10) at front of
compression frame (11).
(3)
Remove three nuts (12), lockwashers (13)
and adapters (10) from compression
frame (11). Discard lockwashers.
(4)
Remove three screws (14), lockwashers (15)
and washers (16) from diverter
manifold (17). Discard lockwashers.
(5)
Remove two nuts (18) and compression
frame tubes (6) from diverter manifold (17).
(6)
Remove two fittings (19) and preformed
packings (20) from diverter manifold (17).
Discard preformed packings.
(7)
Remove two preformed packings (21),
spacers (22), compression rings (23) and
nuts (18) from compression frame tubes (6).
Discard preformed packings.
|
