|
| |
TM 9-2320-364-34-3
16-277
(8)
Remove left side compression frame
nut (24) and left side compression frame
tube (6) from adapter (25).
(9)
Remove preformed packing (26),
spacer (27), compression ring (28)
and nut (24) from left side compression
frame tube (6). Discard preformed packing
(10)
Remove nut (29) and adapter (25) from
compression frame (11).
(11)
Repeats Steps (1) through (10) for right
side.
(12)
Remove locknut (30) and three rubber
bumpers (31) from compression frame (11).
Discard locknut
c.
Assembly.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(1)
Coat threads of three rubber bumpers (31)
with sealing compound.
(2)
Install three rubber bumpers (31) in
compression frame (11).
(3)
Install locknut (30) on rubber bumper (31).
|
