|
| |
TM 9-2320-364-34-3
17-33
(3)
Apply hydraulic oil to preformed
packing (14).
(4)
Install preformed packing (14) and elbow
(5) in front control subassembly (2).
Tighten nut (13).
(5)
Apply hydraulic oil to three preformed packings (11).
NOTE
If installing front control subassembly, perform Steps (6) through (8).
If installing rear control subassembly, perform Steps (9) through (12).
(6)
Install front control subassembly (2) on hydraulic pump (12) with three preformed packings (11) and screws
(10).
(7)
Apply hydraulic oil to preformed packing (4).
(8)
Install preformed packing (4) and hose 2503 (3) on elbow (5).
(9)
Install rear control subassembly (6) on hydraulic pump (12) with three preformed packings (11) and
screws (10).
(10)
Apply hydraulic oil to preformed packing (8).
(11)
Install preformed packing (8) and tee (7) on adapter (9).
(12)
Close front access cover (1).
|
