|
| |
TM 9-2320-364-34-3
17-52
17-9. LOAD HANDLING SYSTEM (LHS) SOLENOID VALVE AND COIL
REPAIR (CONT).
(4)
Install solenoid valve coil (9) on solenoid
valve (11) with nut (10).
(5)
Install connector (8) on solenoid valve
coil (9) with screw (7).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(6)
Apply sealing compound to the head of
screw (7).
(7)
Install LHS main junction box cover (5) on
LHS main junction box (6) with four
lockwashers (4) and screws (3).
(8)
Connect two hose quick disconnects (1) on
main control box quick disconnects (2).
c.
Follow-On Maintenance:
Start engine, (TM 9-2320-364-10).
Operate LHS, (TM 9-2320-364-10).
Check for oil leaks, (TM 9-2320-364-10).
Shut OFF engine, (TM 9-2320-364-10).
Check hydraulic oil reservoir level, (TM 9-2320-364-20).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
