|
| |
TM 9-2320-364-34-3
17-115
Materials/Parts
Cable Ties (Item 9, Appendix B)
Oil, Hydraulic (Item 34, Appendix B)
Solvent, Drycleaning (Item 68, Appendix B)
Tags, Identification (Item 72, Appendix B)
Lockwasher (3) (Item 266, Appendix E)
Packing, Preformed (2) (Item 332, Appendix E)
Packing, Preformed (2) (Item 333 Appendix E)
Packing, Preformed (4) (Item 355, Appendix E)
This task covers:
a. Removal
c. Cleaning/Inspection
e. Installation
b. Disassembly
d. Assembly
f. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Cap and Plug Set (Item 26, Appendix F)
Caps, Vise Jaw (Item 27, Appendix F)
Compressor Unit, Air (Item 35, Appendix F)
Gloves, Chemical Oil Protective
(Item 81, Appendix F)
Goggles, Industrial (Item 83, Appendix F)
Gun, Airblow (Item 86, Appendix F)
Pan, Drain (Item 145, Appendix F)
Vice, Machinist (Item 248, Appendix F)
Wrench, Combination 1-3/4 in.
(Item 263, Appendix F)
Wrench, Combination 1-13/16 in.
(Item 264, Appendix F)
17-19. DIVERTER BLOCK REPAIR.
NOTE
Remove cable ties as required.
Tag and mark hoses prior to removal.
Cap and plug hoses after removal.
(1)
Position drain pan under diverter block (1).
(2)
Remove hose 2891 (2), hose 2882 (3), hose 2881 (4) and hose 2892 (5) from four adapters (6).
|
