|
| |
TM 9-2320-364-34-3
17-116
17-19. DIVERTER BLOCK REPAIR (CONT).
(3)
Remove three screws (7), lockwashers (8)
and washers (9) from bracket (10) and
diverter block (1). Discard lockwashers.
(4)
Remove two coupling nuts (11) from
adapters (12).
(5)
Remove diverter block (1) from tubes (13)
and (14).
(6)
Remove two preformed packings (15),
bushings (16), sleeves (17) and coupling
nuts (11) from tubes (13) and (14). Discard
preformed packings.
b.
Disassembly.
(1)
Position diverter block (1) in soft-jawed vise.
(2)
Remove two adapters (2) and preformed
packings (3) from diverter block (1).
Discard preformed packings.
(3)
Remove four adapters (4) and preformed
packings (5) from diverter block (1).
Discard preformed packings.
|
