|
| |
TM 9-2320-364-34-3
13-15
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 237, Appendix F)
Wrench Set, Socket 3/4 in. Drive
(Item 269, Appendix F)
Wrench, Torque (0 to 175 lb-ft [0-237 N.m])
(Item 272, Appendix F)
Materials/Parts
Sealing Compound (Item 56, Appendix B)
Tags, Identification (Item 72, Appendix B)
Locknut (2) (Item 165, Appendix E)
Locknut (32) (Item 166, Appendix E)
Locknut (16) (Item 167, Appendix E)
Screw (4) (Item 532, Appendix E)
This task covers:
a. Front Tandem Crossmember Removal
e. Lower Right Gusset Replacement
b. Upper Left Gusset Replacement
f. Front Tandem Crossmember Installation
c. Lower Left Gusset Replacement
g. Follow-On Maintenance
d. Upper Right Gusset Replacement
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Batteries disconnected, (TM 9-2320-364-20)
Right front fender skirt removed,
(TM 9-2320-364-20)
Left front fender skirt removed,
(TM 9-2320-364-20)
Service brake relay No. 1 removed,
(TM 9-2320-364-20)
Longitudinal torque rod removed, (Axle No. 2)
(Para 14-9)
13-6. FRONT TANDEM CROSSMEMBER/GUSSET REPLACEMENT.
a.
Front Tandem Crossmember Removal.
NOTE
Tag and mark screws prior to removal.
(1)
Remove four screws (1) and two straps (2) from yoke (3) on Axle No. 1 (4). Discard screws.
(2)
Disconnect front end of driveshaft (5) from yoke (3) on Axle No. 1 (4).
|
