|
| |
TM 9-2320-364-34-3
13-16
13-6. FRONT TANDEM CROSSMEMBER/GUSSET REPLACEMENT (CONT).
NOTE
Crossmember is removed the
same way on both sides. Left
side shown.
(3)
Remove four locknuts (6) and screws (7)
from bottom gusset (8) and crossmembers
(9) and (10). Discard locknuts.
(4)
Remove eight locknuts (11) and screws (12)
from bottom gusset (8) and crossmembers
(9) and (10). Discard locknuts.
(5)
With the aid of an assistant, remove two
locknuts (6) and screws (7) from top gusset
(13) and crossmember (10). Discard
locknuts.
NOTE
Only remove locknuts from top
gussets, insert extension rod
through holes in bottom gussets.
(6)
With the aid of an assistant, remove four
locknuts (11) and screws (12) from top
gusset (13) and crossmember (10). Discard
locknuts.
(7)
Remove locknut (14) and screw (15) from
spring hanger bracket (16). Discard locknut
(8)
Remove crossmember (10) from gussets (13)
and (8).
|
