|
| |
TM 9-2320-364-34-3
18-31
(39)
Remove nut (67) and lockwasher (68) from
24 volt load terminal (69) of polarity
protection control (18).
(40)
Install wire 1281 (70), lockwasher (68) and
nut (67) on 24 volt load terminal (69).
(41)
Position DDEC battery power wire harness
(200 AMP) (71) in truck.
NOTE
Wire 1430, wire 1866, wire 1079,
and wire 1075 are part of the
polarity wire harness (200 AMP)
and wire 240/241 is part of the
DDEC battery power wire
harness (200 AMP). All wires are
installed on the 12 volt load
terminal of the polarity protection
control.
(42)
Remove nut (72) and lockwasher (73) from
12 volt load terminal (74) of the polarity
protection control (18).
(43)
Install wire 1430 (75), wire 1866 (76), wire
1079 (77), wire 1075 (78), wire 240/241
(79), lockwasher (73) and nut (72) on 12
volt load terminal (74).
67
69
68
72
73
18
79
77
18
74
70
78
71
75
76
|
