|
| |
TM 9-2320-364-34-3
18-37
(70)
Position three alternator belts (127) on
alternator (12) and engine pulley (128).
(71)
Install nut (129), lockwasher (130) and
washer (131) on alternator support arm
(132).
(72)
Position alternator support arm (132) in
bracket (133).
(73)
Tighten screw (134) to 170 lb-ft (230 N.m).
(74)
Position alternator support arm (132) on
alternator (12) with screw (135) and
locknut (136).
(75)
Position washer (137), lockwasher (138)
and nut (139) on alternator support arm
(132).
(76)
Install belt tensioning gage on belts (127).
(77)
Tighten nut (129) on alternator support arm
(132) until alternator belts tension reaches
60 to 65 lbs (260 to 289 N).
(78)
Tighten nut (139) on alternator support arm
(132).
(79)
Remove belt tensioning gage from belts
(127).
(80)
Tighten locknut (136) on screw (135) to
26-30 lb-ft (30-41 N.m).
(81)
Tighten nut (17) on screw (13) and
alternator mounting bracket (5) to 90 lb-ft
(122 N.m).
129
138
134
137
128
131
130
132
129
132
139
136
133
135
139
12
127
5
127
13
17
136
135
|
