|
| |
TM 9-2320-364-34-3
13-23
f.
Front Tandem Crossmember Installation.
NOTE
All screws must be installed in
original locations.
(1)
With the aid of an assistant, position
crossmember (9) between gussets (13)
and (8).
(2)
With the aid of an assistant, install four
screws (12) and locknuts (11) in gusset (13),
(8) and crossmember (9).
(3)
With the aid of an assistant, install two
screws (7) and locknut (6) in gusset (13), (8)
and crossmember (9).
NOTE
Perform Step (4) if quickedge
was removed.
(4)
Install quickedge (17) on right side of
crossmember (10).
|
