|
| |
TM 9-2320-364-34-3
13-24
13-6. FRONT TANDEM CROSSMEMBER/GUSSET REPLACEMENT (CONT).
NOTE
Crossmember is installed the
same way on both sides. Left
side shown.
(5)
With the aid of an assistant, position
crossmember (10) between gussets (13)
and (8).
(6)
Install screw (15) and locknut (14) in spring
bracket hanger (16).
NOTE
To install locknuts in top gusset
and crossmember, position
extension rod through holes in
bottom gusset and crossmember.
(7)
With the aid of an assistant, install four
screws (12) and locknuts (11) in top gusset
(13) and crossmember (10).
(8)
With the aid of an assistant, install two
screws (7) and locknuts (6) in top gusset
(13) and crossmember (10).
(9)
With the aid of an assistant, install eight
screws (12) and locknuts (11) in bottom
gusset (8) and crossmembers (9) and (10).
(10)
With the aid of an assistant, install four
screws (7) and locknuts (6) in bottom
gusset (8) and crossmembers (9) and (10).
|
