|
| |
TM 9-2320-364-34-3
18-135
NOTE
Adapter in Step (3) is installed in
bottom port marked ”IN” and
facing down.
(3)
Install adapter (2) in engine oil filter
manifold (1).
(4)
Remove engine oil filter manifold (1) from
vise.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(5)
Apply sealing compound to threads of two
screws (3), screws (4), and screws (5).
(6)
Install gasket (6) and engine oil filter
manifold (1) on oil cooler adapter cover (7)
with two screws (3), screws (4), screws (5)
and four lockwashers (8). Tighten screws 30
to 35 lb-ft (41 to 47 N.m).
6
5
4
3
1
2
8
7
8
|
