|
| |
TM 9-2320-364-34-3
18-146
18-13. CONTAINER HANDLING UNIT (CHU) KIT INSTALLATION (CONT).
Right front support bracket
weighs 98 lbs (44 kg). Attach
suitable lifting device to prevent
possible injury to personnel.
(22)
From CHU kit pallet, attach lifting device
to right front support bracket (43).
(23)
With the aid of an assistant, position right
front support bracket (43) between frame
(27), bracket (35), auxiliary fuel tank
support (28) and rear fender support (39).
NOTE
Ensure top front screw is
installed from inside of
frame.
Perform Step (24) for trucks
equipped with auxiliary fuel
tank.
Screw installed in rear upper
hole of auxiliary fuel tank
support was removed with
platform assembly.
Perform Step (25) for trucks
not equipped with auxiliary
fuel tank.
(24)
With the aid of an assistant install screw
(32), four screws (44), screw (45), six
locknuts (46), two screws (47), locknuts
(48), screw (49) and locknut (50) in
auxiliary fuel tank support (28).
(25)
With the aid of an assistant install six
screws (44), six locknuts (46), two screws
(47), locknuts (48), screw (49) and locknut
(50).
(26)
Remove two locknuts (30) from screws
(29). Discard locknuts.
(27)
Install two locknuts (30) on two screws
(29).
(28)
Remove lifting device from right front
support bracket (43).
28
43
44
47
50
27
32
39
48
49
46
35
46
30
29
45
|
