|
| |
TM 9-2320-364-34-3
18-147
Front support assembly weighs
660 lbs (300 kg). Attach suitable
lifting device to prevent possible
injury to personnel.
Ensure lifting device does not
contact air cylinders or air lines.
Failure to comply may result in
damage to equipment.
(29)
From CHU kit pallet, attach lifting device
to front support assembly (51).
(30)
With the aid of an assistant, position front
support assembly (51) on left front support
bracket (15) and right front support bracket
(43).
NOTE
Hardware for mounting front
support assembly can be found in
box D, pack no. 21 of CHU kit
crate.
(31)
Remove two screws (52), lockwashers (53)
and washers (54) from deck weldment (55).
Discard lockwashers.
(32)
Loosen two screws (56) and rotate deck
weldment (55) toward front of truck.
(33)
Repeat Steps (31) and (32) for remaining
deck weldment (55).
(34)
With the aid of an assistant, install front
support assembly (51) on left front support
bracket (15) and right front support bracket
(43) with 18 screws (57) and locknuts (58).
(35)
Remove lifting device from front support
assembly (51).
15
51
52
53
56
55
57
58
43
54
|
