|
| |
TM 9-2320-364-34-3
18-152
18-13. CONTAINER HANDLING UNIT (CHU) KIT INSTALLATION (CONT).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
NOTE
Pivot pin can be found in box
D, pack no. 30 of CHU kit
crate.
Antiseize compound can be
found in box A of CHU kit
crate.
(53)
Apply antiseize compound to pivot pin
(78).
Use care when removing snap
and retaining rings. Snap and
retaining rings are under spring
tension and can act as projectiles
when released and could cause
severe eye injury.
NOTE
Retaining rings and washer
guards can be found in box
D, pack no. 15 of CHU kit
crate.
Bore in hook arm may need
to be cleaned for installation
of pivot pin.
(54)
Install pivot pin (78), two washer guards
(76) and retaining rings (79) on hook arm
(77) and hook (74).
74
76
76
77
78
79
79
BORE
|
