|
| |
TM 9-2320-364-34-3
18-153
(55)
Support hook (74) and remove snapper pin (80) and washer (81) from hook arm (77). Discard washer.
(56)
Position retaining pin (82) with handle
pointing down in hook arm (77) and hook
(74).
NOTE
Retaining bracket can be found in
box D, pack no. 23 of CHU kit
crate.
(57)
Install retaining bracket (83) and snapper
pin (80) to retaining pin (82).
NOTE
Wire tether is properly installed
when wire tether is positioned
through loop in snapper pin.
(58)
Install wire tether (84) to snapper pin (80)
with swaging sleeve (85).
(59)
Remove lifting device from hook (74).
80
83
81
74
77
74
77
80
85
82
84
LIFTING DEVICE
|
