|
| |
TM 9-2320-364-34-3
18-154
18-13. CONTAINER HANDLING UNIT (CHU) KIT INSTALLATION (CONT).
NOTE
Perform Steps (60) through
(76) if truck is equipped with
self-recovery winch.
Adapter plate and guide
bracket are bolted to CHU kit
pallet. Hardware is in box E,
pack no. 35 and 36 of CHU
kit crate.
Two screws in Step (60)
were removed with rear
tension guide.
(60)
With the aid of an assistant install two
screws (86), screws (87), four locknuts (88)
and adapter plate (89) to frame (27).
Adhesives, solvents, and
sealing compounds can burn
easily, can give off harmful
vapors, and are harmful to
skin and clothing. To avoid
injury or death, keep away
from open fire and use in
well-ventilated area. If
adhesive, solvent, or sealing
compound gets on skin or
clothing, wash immediately
with soap and water.
Rear tension guide weighs 50
lbs (23 kg). Attach suitable
lifting device to prevent
possible injury to personnel.
(61)
Apply sealing compound (loctite 242) to
threads of four screws (90).
(62)
With the aid of an assistant, install rear
tension guide assembly (91) on adapter
plate (89) with four screws (90).
88
91
27
89
86
89
90
87
|
